K57
K 57 is a double acting complete piston seal which consists of an aluminum plate vulcanized with elastomeric nitrile rubber using special production methods.
-
Ready to fit complete piston
-
Reliable pressure application at the end of stroke by the venting passages
-
Low friction and smooth running due to sealing lip geometry
-
Easily fastened to the piston rod without using additional sealing elements
-
Economical sealing solution
Standard pneumatic cylinders and after market.
K 57 is pushed onto the piston rod on the clamping flange towards the rod and fixed by fastening. The nut has to be secured. The sliding surface and the cylinder bore should be oiled with oil that must not go into the reaction with the sealing element during the installation process.
For special applications that require high temperatures, K 57 can be produced in FKM material.
Material | Code |
NBR 70 SHORE A | NBR7001 |
ALUMINIUM | AL9901 |
Surface roughness | Rmax |
Sliding Surface Ød | ≤4 μm |
OPERATING CONTITIONS
Media | Prepared, dried and de-oiled compressed air |
Temperature | -30 °C +105 °C |
Pressure | ≤12 bar |
Speed | ≤1.0 m/sec |
Szeretne többet megtudni a termékről?
E-mail
info@intramark.hu
Telefon
+36 52 781 391
+36 30 747 6811
Fax
+36 52 346 917
Intramark központ
4002 Debrecen,
Kádár dűlő 28/B.